Micro Thermal/Fluidic Laboratory

Professor Research Group Members Publications Course Lectures Home

 

(A)期刊論文(Journal Papers):

2014

 
Tzong-Shyng Leu, Chin-Fong Lin, "Control of Bubble Growth by using Virtual Chamber Neck in Micro Nozzle Channel", Applied Mechanics and Materials Vols. 629, pp 431-436, 2014  (EI) <PDF>

2013

M. S. Ozhgibesov, T. S. Leu, C. H. Cheng, A. V. Utkin, "Studies on argon collisions with smooth and rough tungsten surfaces”, Journal of Molecular Graphics and Modelling, Vol. 45, pp.45-49, 2013  (SCI, EI, Impact factor=2.184, COMPUTER SCIENCE, INTERDISCIPLINARY APPLICATIONS 19/99) <PDF>
D. J. Huang, T. S. Leu, "Fabrication of High Wettability Gradient on Copper Substrate”, Applied Surface Science, Vol.280, pp 25~32, 2013  (SCI, Impact factor=2.538, Material Science, Coating 2/18) <PDF>
M. S. Ozhgibesov, T. S. Leu, C. H. Cheng, "Rarefied gas flow through the tungsten channels”, Journal of Molecular Graphics and Modeling, Vol. 42, pp.32-38, 2013  (SCI, EI, Impact factor=2.184, COMPUTER SCIENCE, INTERDISCIPLINARY APPLICATIONS 19/99) <PDF>
T. S. Leu, S. Y. Li, "Scaling Issues of Micro Catalytic Reactors", Applied Mechanics and Materials Vols. 284-287, pp 2137-2141, 2013  (EI) <PDF>
Tzong-Shyng Leu, Chin-Tsan Wang, Jui-Ming Yo, Yao-Cheng Lee, "Technology of micromatrix posts applied to elimination of initial filling and Newton ring in a microcapillary pumped loop",, Journal of Micro-Nanolithography MEMS and MOEMS (JM3), Volume 12, Issue 3, pp. 033007-1~033007-4 Jul.-Sep. 2013 (SCI, Impact factor=0.541, ENGINEERING, ELECTRICAL & ELECTRONIC 169/246)<PDF>
Jing-Fung Lin, Cong-Hui Huang and Tzong-Shyng Leu, "Measurement of Retardance and Birefringence in PLZT10/30/70 Film with PLT Layer", Przeglad Elektrotechniczny (Electrical Review), Vol. 89 Issue 1, pp.108~111, 2013 (ISSN 0033-2097, SCI, Impact factor=0.242) <PDF>

2012

M. S. Ozhgibesov, T. S. Leu, C. H. Cheng, A. V. Utkin, "New Statistical Boundary Conditions for Argon-Tungsten Interactions",Journal of Molecular Graphics and Modelling Vol. 38 pp.375–381, 2012  (SCI, EI, Impact factor=2.184, COMPUTER SCIENCE, INTERDISCIPLINARY APPLICATIONS 19/99) <PDF>
Wei-Hsin Chen, Mu-Rong Lin, A.B. Yu, Shan-Wen Du, and Tzong-Shyng Leu, "Hydrogen production from steam reforming of coke oven gas and its utility for indirect reduction of iron oxides in blast furnace",   International Journal of Hydrogen Energy, 37 (2012) 11748~11758 (SCI, EI, Impact factor= 4.054, ENERGY & FUELS 12/81) <PDF>
M. S. Ozhgibesov, T. S. Leu, C. H. Cheng, A. V. Utkin, "Simulation of copper nanocluster deposition on the contaminated surface using gaming GPU",  International Journal of Computational Materials Science and Engineering, 01(01), 1250007-1250001.(EI)
J. J. Miau, S. W. Huang, Y. D. Tsai, S. Y. Liang, C. H. Hsieh, S. J. Chen, C. C. Hu, J. C. Cheng, and T. S. Leu, "WIND-TUNNEL STUDY ON AERODYNAMIC PERFORMANCE OF SMALL VERTICAL-AXIS WIND TURBINES",  Journal of Chinese Society of Mechanical Engineers (Accepted)<PDF>
Tzong-Shyng Leu‚ Yan-Hao Liu, "Design and Fabrication of Thermocapillary Micro Bubble Pump", Advanced Materials Research Vol. 528, pp23~26, 2012(ISSN: 1022-6680) (EI)<PDF>
T. S. Leu, J. M. Yu,  C. C. Hu, J. J. Miau, S. Y. Liang, J. Y. Li, S. J. Chen, and J. C. Cheng, "Experimental Study of Free Stream Turbulence Effects on Dynamic Stall of a Pitching Airfoil by using Particle Image Velocimetry", Applied Mechanics and Materials Vol. 225 ,pp 103-108, 2012  (EI) <PDF>
J. J. Miau, S. Y. Liang, R. M. Yu, C. C. Hu, and T. S. Leu, J. C. Cheng, and S. J. Chen, "Design and test of a vertical-axis wind turbine with pitch control", Applied Mechanics and Materials Vol. 225, pp 338-343,  2012 (EI) <PDF>
Tzong-Shyng Leu, and Ching-Yi Pai ,"Particle-Free Extraction by Using Microchannel Structures", International Journal of Modern Physics: Conference Series Vol. 19, pp.237–241, 2012 (EI) <PDF>
Tzong-Shyng Leu, Zhi-Feng Liao, "Separating Plasma and Blood Cells by Dielectrophoresis in Microfluidic Chips",  International Journal of Modern Physics Vol. 19, pp.185–189, 2012 (EI) <PDF>
 

2011

Tzong-Shyng Leu, Chin-Hsiang Cheng, Mikhail Sergeevich Ozhgibesov ,"New Modeling of Scattering Behaviors of Argon Atoms on Tungsten Substrate",  Journal of Molecular Graphics and Modeling, Vol. 31, pp 35–40, 2011  (SCI, EI, Impact factor=2.184, COMPUTER SCIENCE, INTERDISCIPLINARY APPLICATIONS 19/99) <PDF>
Wei-Hsin Chen, Mu-Rong Lin, Tzong-Shyng Leu, Shan-Wen Du, "An evaluation of hydrogen production from the perspective of using blast furnace gas and coke oven gas as feedstocks ", International Journal of hydrogen energy  3 6, pp 11727-11737, 2011 (SCI, EI, Impact factor= 4.054, ENERGY & FUELS 12/81) <PDF>

呂宗行,“整合有機薄膜光電二極體用於微尺度化學發光檢驗晶片的技術發展(I):有機聚合物光感測器之研發" 工程科技通訊》114 10010月出刊 <PDF>

Chin-Tsan Wang, C. T. Chang, Tzu-Yang Huz, Tzong-Shyng Leu, "Unsteady Flow Mixing Effect in Bionic Micro-Flow Channel ", International Journal of Chemical Reactor Engineering, Vol. 9. 2011(SCI, EI, Impact factor=0.79, ENGINEERING, CHEMICAL 79/133) <PDF>
Chin-Tsan Wang, Tzong-Shyng Leu, "Thermal Effect of the Slanted Surface around the Central Hole of a Miniature Delta Wing on the Leading-edge Vortices ", WSEAS TRANSACTIONS on SYSTEMS, Issue 2, Volume 10, February 2011(EI)  <PDF>
 

2010

Wei-Hsin Chen, Mu-Rong Lin, Jau-Jang Lu, Yu Chao, Tzong-Shyng Leu, "Thermodynamic analysis of hydrogen production from methane via autothermal reforming and partial oxidation followed by water gas shift reaction", International Journal of Hydrogen Energy Vol. 35,  Issue: 21 pp. 11787~11797 , 2010 (SCI, EI, Impact factor=4.075 ENERGY & FUELS 12/79)<PDF>
Tzong-Shyng Leu, Chin-Tsan Wang, Jia-Ming Sun, "Optimal Design and Operation on Covergent-Divergent Nozzle Type No-Moving-Part Valves (NMPV) in Microchannel", Journal of Mechanics, Vol. 26, No. 3, pp. 259~265 Sep. 2010 (SCI, EI, Impact factor=0.408 MECHANICS 113/133) <PDF>
Muh-Rong Wang, Tzong-Shyng Leu, Yi-Jun Shen, Wei-Lung Weng, "Performance of Micro-Injector with Inner Block for Drop on Demand Applications", Modern Physics Letters B, Vol. 24 No. 13, 1373-1376, May 30, 2010 (SCI, Impact factor=0.512 PHYSICS, CONDENSED MATTER 55/66) <PDF>
Tzong-Shyng Leu, Hung-Wen Lin, Tseng-Hsin Wu, "Applications of Surface Modification Techniques In Enhancement of Phase Change Heat Transfer" Modern Physics Letters B, Vol. 24 No. 13, Page: 1381-1384, May 30, 2010 (SCI, Impact factor=0.512 PHYSICS, APPLIED 92/108) <PDF>
Tzong-Shyng Leu, Jeng-Ren Chang, and Chun-Lin Kuo, "Experimental Investigation of Slenderness Effects on Side Force of Slender Body" Modern Physics Letters B, Vol. 24 No. 13, Page: 1413-1416, May 30, 2010 (SCI, Impact factor=0.512 PHYSICS, APPLIED 92/108)<PDF>
Tzong-Shyng Leu, Chin-Tsan Wang, Nan-Jia Huang, "Dimensional Effect of Micro Capillary Pumped Loop", Journal of Mechanics, Vol. 26, No. 2, June 2010 (SCI, Impact factor=0.61 MECHANICS 98/123) <PDF>
Wei-Hsin Chen, Mu-Rong Lin, and Tzong-Shyng Leu, "Optimal Heating and Energy Management for Slabs in a Reheating Furnance", Journal of Marine Science and Technology, Vol. 18, No. 1, pp. 24-31, Feb. 2010 (SCI, EI, Impact factor=0.458, ENGINEERING, MULTIDISCIPLINARY 54/87) <PDF>
Ching-Te Huang, Po-Ni Li, Ching-Yi Pai, Tzong-Shyng Leu and Chun-Ping Jen, "Design and simulation of a microfluidic blood-plasma separation chip using microchannel structures", Separation Science and Technology, Vol. 45, Issue 1, pp. 42-49, 2010 (SCI, Impact factor=1.015, ENGINEERING, CHEMICAL 64/135) <PDF>
Tzong-Shyng Leu, Pin-Chin Jiang, "Fe-PDMS Fabricated Microchannels for Peristaltic Pump Applications", 5th IEEE International Conference of Nano/Micro Engineered and Molecular Systems, Jan. 20~23 2010, IEEE Xplore Digital Object Identifier xx.xxxx/NEMS.2010.xxxxxx (EI)
Tzong-Shyng Leu, Chin-Tsan Wang and Jui-Ming Yu, "Elimination of Initial Filling and Newton Ring in Micro Capillary Pumped Loop by Micro-matrix Posts", 5th IEEE International Conference of Nano/Micro Engineered and Molecular Systems, Jan. 20~23 2010, IEEE Xplore Digital Object Identifier xx.xxxx/NEMS.2010.xxxxxx (EI)
王金燦,呂宗行,砷化鎵射頻功率放大器封閉迴管路微型散熱器最佳化設計,工程科技通訊99年4月出刊第105期, Vol.105, pp.36-40,2010
 

2009

Chin-Tsan Wang, Tzong-Shyng Leu, Jia-Ming Sun, "Asymmetrical flow effect applied to pumping performance of simple duct channel ", SENSORS AND ACTUATORS A-PHYSICAL   Volume: 155   Issue: 1   Pages: 203-209   Oct. 2009 (SCI Impact factor=1.674, INSTRUMENTS & INSTRUMENTATION 14/58) <PDF>
Tzong-Shyng Leu, Chih-Yuan Weng, “Studies of Particle Levitation in a DEP-FFF Based Micro Sorter”, Journal of Micro-Nanolithography MEMS and MOEMS (JM3), Volume 8, Issue 2, pp. 021106-1~021106-5 April-June 2009 (SCI, Impact factor=0.541, ENGINEERING, ELECTRICAL & ELECTRONIC 169/246)<PDF>
Chin-Tsan Wang, Tzong-Shyng Leu, Jia-Ming Sun, "Optimal Design and Operation for a No-Moving-Parts-Valve (NMPV) Micro-Pump with a Diffuser Width of 500 mm", Sensors, Vol. 9, pp.3666-3678, May, 2009 (SCI, Impact factor=1.821, INSTRUMENTS & INSTRUMENTATION 11/58)<PDF>
Tzong-Shyng Leu, Chih-Yuan Weng, “Dynamics of Dielectrophoretic Field-Flow Fractionation (DEP-FFF) based Micro Sorter for Cell Separation”,  Modern Physics Letters B (MPLB), Volume 23, Issue 3, Pages: 389-392 Jan. 30, 2009 (SCI, Impact factor=0.512 PHYSICS, APPLIED 92/108) <PDF>
呂宗行,“古老物理新應用-表面張力於微熱流系統應用”,灣化工工程學會會刊, 56卷4期 (2009/08); Chemical Engineering (The Taiwan I. Ch. E.) Vol. 56, No. 4, Aug. 2009, (ISSN 1015-8359)<PDF>
Chin-Tsan Wang, Tzong-Shyng Leu, Jui-Ming Yu, "THERMAL ANALYSIS OF MICRO CAPILLARY PUMPED LOOP SYSTEM", 7th International Conference on Nanochannels, Microchannels and Minichannels, Pohang, SOUTH KOREA Date: JUN 22-24, 2009
ICNMM 2009, PTS A-B Pages: 1175-1178 Published: 2009 (EI)
<PDF>
Tzong-Shyng. Leu , Horng-Jiann Song, “New Pumping Mechanism by Surface Waves in a Microchannel”, Proceeding of  4th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2009  IEEE Xplore Digital Object Identifier 10.1109/NEMS.2009.352057 (EI)
 

2008

Tzong-Shyng Leu, Jan-Hua Lin, “Experimental Studies of Meniscus Dynamic Behaviors in a Squeeze Mode Piezoelectric Inkjet Printhead”, Materials Science Forum Vol. 594, pp 155-162, 2008 (EI) <PDF>
Chin-Tsan Wang, Tzong-Shyng Leu and Tsai-Ming Lai , "Micro capillary pumped loop system for a cooling high power device ", Experimental Thermal and Fluid Science Vol. 32 Issue 5, pp.1090-1095, 2008 (SCI, Impact factor=1.037 ENGINEERING, MECHANICAL 39/105)<PDF>
Tzong-Shyng. Leu, Tseng-Hsin Wu, “Droplet Movement on a Vertical Gradient Surface”, 3rd IEEE International Conference on Nano/Micro Engineered and Molecular Systems, NEMS, p 641-646, 2008 (EI)
 

2007

C.-T. Wang, T.-S. Leu, J.-M. Sun, “Unsteady Analysis of Microvalves with No Moving Parts”, Journal of Mechanics, Vol. 23, No. 1,  pp.9~14, March 2007 (SCI, Impact factor=0.722 MECHANICS 64/112) <PDF>
Min-Chien Tsai , Tzong-Shyng. Leu, “The Study of Flexible Plate Wave Device for Micro Pumping System”, Proceedings of
the 2nd IEEE International Conference on Nano/Micro Engineered and Molecular Systems, IEEE NEMS 2007, p 452-457, 2007,
(EI) <PDF>
Tzong-Shyng. Leu, Yao-Jen Kuo, “Numerical Simulation and Optimal Design on a new Dielectrophoretic-based Cytosorter”, IEEE International Conference on Nano/Micro Engineered and Molecular Systems, IEEE NEMS 2007, p 556-560, 2007 (EI) <PDF>
Tzong-Shyng. Leu, Hung-Ying Chen, and Fei-Bin Hsiao, “Micro Sorters with 3D Focusing and Continuous Sorting”, Proceedings of the 2nd IEEE International Conference on Nano/Micro Engineered and Molecular Systems, IEEE NEMS 2007, p 608-613, 2007, (EI) <PDF>
 

2006

Tzong-Shyng Leu, Hung-Ying Chen, and Fei-Bin Hsiao, “Design and simulation of continuous dielectrophoretic flow sorters”, Journal of Mechanics, Vol. 22, No. 2,  pp.99~106, June 2006 (SCI, Impact factor=0.531 MECHANICS 84/109) <PDF>
T. S. Cheng , C. Y.Wu, C. P. Chen, Y. H. Li, Y. C. Chao, T. Yuan, T. S. Leu, “Detailed measurement and assessment of laminar hydrogen jet diffusion flames”, Combustion and Flame 146, pp.268–282, 2006 (SCI, Impact factor=1.828 Thermodynamics 3/42) <PDF>
Chin-Tsan Wang., Tzong-Shyng Leu and Tsai-Ming Lai, "Theoretical Analysis of Pressure Gradient of Tapered Micro-Channel", Journal of Chung Cheng Institute Of Technology Vol.34, No.2, pp.87, 2006 (EI)
 Tzong-Shyng Leu, Chi-Hsiung Teng, Design, Fabrication and Study of Micro-Electrospray Chips,” Material Science Forum Vols. 505~507,  pp.1249~1254, Jan. 2006 (EI) <PDF>
Tzong-Shyng. Leu, Hung-Wen Li, Tseng-Hsin Wu,“Enhancement of Phase Change Heat Transfer by using Surface Energy Patterning Techniques”, Nano/Micro Engineered and Molecular Systems, 2006. NEMS '06. 1st IEEE International Conference on 18-21 Jan. 2006 Page(s):994 - 998, IEEE Xplore Digital Object Identifier 10.1109/NEMS.2006.334597  (EI) <PDF>

2005

T. S. Cheng, Y.-C. Chao, C.-Y. Wu, Y.-H. Li, Y. Nakamura, K.-Y. Lee, T. Yuan, and T. S. Leu ,”Experimental and Numerical Investigation of Microscale Hydrogen Diffusion Flames”, PROCEEDINGS OF THE COMBUSTION INSTITUTE 30: Part 2, 2005, pp. 2489-2497   (SCI, EI, Imact factor=0.683) <PDF>
S. T Jeng, T-S Leu, Y.G. Su, J.S Lee, and G. C. Hwang, “Developing A Mini-impact System for Measuring Silicon Wafer’s Elastic Dynamic Response,” Journal of Mechanics, Vol. 21, No. 1, March, 2005  (SCI, Impact factor=0.156 MECHANICS 108/110) <PDF>
Tzong-Shyng Leu, Jeng-Ren Chang, and Pong-Jeu Lu, “Side Force Reduction of Cone-Cylinder at High Angle-of-Attack Using Micro Balloon Array Actuator,” Journal of Propulsion and Power, Volume 21, Number 5, September-October, 2005 pp. 844-852 (SCI, Impact factor=0.788, ENGINEERING, AEROSPACE 5/25) <PDF>
Tzong-Shyng. Leu, and Fei-Chi Ma, “Novel EHD-Pump Driven Micro Mixers”, Journal of Mechanics, Vol.21, No. 3,  September 2005, pp.137~144 (SCI, Impact factor=0.156 MECHANICS 108/110)  <PDF>
Tzong-Shyng Leu, Jeng-Ren Chang, and Pong-Jeu Lu, “Experimental Investigation of Side Force Control on Cone-Cylinder Slender Bodies with Flexible Micro Balloon Actuators,” Journal of Experimental Thermal, and Fluid Science, 29, September 2005, pp.909~918 (SCI, Impact factor=0.717, ENGINEERING, MECHANICAL 35/104) <PDF>
Tzong-Shyng Leu, Hung-Ying Chen and Fei-Bin Hsiao, “Studies of Particle Holding, Separating and Focusing using Convergent Electrodes in Micro Sorters" Microfluidics and Nanofluidics, Volume 1, Number 4, October 2005, pp.328~335  (SCI, Impact factor=1.286 INSTRUMENTS & INSTRUMENTATION 11/52)  <PDF>
Leu, T.S.; Shun-Yi Li, "Operation limits of micro catalytic combustors", Robotics and Biomimetics (ROBIO). 2005 IEEE International Conference on July 5, 2005 Page(s):257 - 262  (EI) <PDF>
 苗君易,呂宗行,“光學式流體計量特別報導”,量測資訊 103, May. 2005, (ISSN 1023-4527)
 Tzong-Shyng Leu; Yei-Chin CHAO; Yun-Che WEN; Yu-Jane WU,” Teaching Micro System Design by Using Multi-User Micro Avionics System Laboratory in Aerospace Educational Reform Program of Taiwan,” Innovations 2005: World Innovations in Engineering Education and Research, iNEER Special Volume 2005<PDF>

2004

Leu, T-S, and Chang, P-Y, ”Pressure Barrier of Capillary Stop Valves in Micro Sample Separators,Sensors and Actuators A:  Physical, 115 508-515, 2004 (SCI, EI; Impact factor=1.724) <PDF>
 Y. C. Chao, G. B. Chen, J. R. Hsu, T. S. Leu, C. Y. Wu, and T. S. Cheng “Operational Characteristics of Catalytic Micro-Combustion in a Platinum Micro-Tube”, Journal of Combustion Science and Technology 176, 1755-1777, 2004 (SCI, EI,  Impact factor=0.877) <PDF>

2003

呂宗行、廖仁瑞, 應用於電子元件對衝流冷卻研究之白金溫度感測器製程技術發展”, 永達學報,June 2003 (ISSN 1607-2408)

1990~2000

Leu, T. S. and Ho, C.M., "Local and Global Instability of 2-D Wake controlled by Suction at the Trailing Edge of Splitter Plate," Journal of Fluid Mechanics, vol. 404, pp. 345-378. 2000 (SCI, EI, Impact factor=2.061)<PDF>
Richard P. Wildes, Michael J. Amabile, Ann-Marie Lanzillotto, and Tzong-Shyng Leu, "Recovering Estimates of Fluid Flow from Image Sequence Data", Computer Vision and Image Understanding 80, 246–266, 2000, (SCI, EI,  Impact factor=1.460)<PDF>
 C. Liu, T. Tsao, T. S. Leu, G. B. Lee, Y. C. Tai, C. M. Ho, “Out-of-Plane Magnetic Actuators with Electroplated Permalloy for Fluid Dynamics Control”, Sensors And Actuators A: Physical, Vol: 78, Issue: 2-3, pp. 190-197, December 14, 1999. (SCI, EI; Impact Factor=1.299)<PDF>
Tzong-Shyng Leu; Lanzillotto, A.-M.; Amabile, M.; Wildes, R., "Analysis of fluidic and mechanical motion in MEMS by using high speed X-ray micro-imaging techniques", Solid State Sensors and Actuators, 1997. TRANSDUCERS '97 Chicago., 1997 International Conference onVolume 1,  16-19 June 1997 Page(s):149 - 150 vol.1 IEEE Xplore Digital Object Identifier 10.1109/SENSOR.1997.613604 (EI), <PDF>
Wildes, R.P.; Lanzillotto, A.-M.; Amabile, M.J.; Tzong-Shyng Leu, "Physically based fluid flow recovery from image sequences", Computer Vision and Pattern Recognition, 1997. Proceedings., 1997 IEEE Computer Society Conference on 17-19 June 1997 Page(s):969 - 975, IEEE Xplore Digital Object Identifier 10.1109/CVPR.1997.609445 (EI), <PDF>
Miau, J. J., Leu, T. S., Liu, T. W., and Chou, J. H., "On vortex shedding behind a circular disk", Experiments in Fluids, Vol. 23, pp. 225-233, 1997. SCI, Impact factor=1.817 ENGINEERING, MECHANICAL 12/116, Cited by 7) <PDF>
Chang Liu; Tsao, T.; Yu-Chong Tai; Tzong-Shyng Leu; Chih-Ming Ho; Wei-Long Tang; Miu, D., "Out-of-plane permalloy magnetic actuators for delta-wing control", Micro Electro Mechanical Systems, 1995, MEMS '95, Proceedings. IEEE 29 Jan.-2 Feb. 1995 Page(s):7 (EI), <PDF>
 Miau, J. J., Leu, T. S., Chou J. H., Lin, S. A. and Lin, C. K., "Flow Distortion in a Circular-to-Rectangular Transition Duct," AIAA Journal ,Vol.28, No. 8, August, 1990 (SCI, Impact factor=0.99 ENGINEERING, AEROSPACE 5/27, Cited by 10) <PDF>
(B)研討會論文(Conference Paper)

2014

Ding-Jun Huang, Tzong-Shyng Leu, "Investigation of Flow Uniformity within the Channels of Copper Heat Sink by Manifold Shape Design", 中國機械工程學會第三十一屆全國學術研討會, 2014
黃鼎鈞,呂宗行,“銅散熱片的表面改質與其應用在冷凝熱傳上的增益探討", 2014中華民國燃燒學會第二十屆燃燒與能源學術研討會 (成功大學 台南, 中華民國103年4月19日)
陳緒瑋 ,呂宗行,“共平面式不對稱電溼潤電極最佳化設計", 2014中華民國燃燒學會第二十屆燃燒與能源學術研討會 (成功大學 台南, 中華民國103年4月19日)
洪凡,呂宗行,張克勤,張文曲,“以赤蘚糖醇為相變化材料之潛熱儲熱系統實驗研究", 2014中華民國燃燒學會第二十屆燃燒與能源學術研討會 (成功大學 台南, 中華民國103年4月19日)

2013

陳慕堯,游瑞名,蔡易庭,呂宗行,苗君易, "臺灣西部濱海於不同高度風況特性及IEC 61400標準風況模型比較之研究", 台灣風能學術研討會,2013 (海洋大學 基隆 中華民國102年12月 5日)
蔡易庭 ,張煒詮 ,呂宗行,“微機電製作之霧化器於螢光性粒子製備之研究", 航太學會學術研討會, 2013 (淡江大學 淡水 中華民國102年11月 30日)<PDF>
陳緒瑋 ,楊承翰 ,呂宗行,“電濕潤技術應用於表面冷凝熱傳之實驗探討", 航太學會學術研討會, 2013 (淡江大學 淡水 中華民國102年11月 30日)<PDF>
李承豫,吳承翰,呂宗行,“管壁表面改質對閉迴路震盪式熱管性能影響之研究", 航太學會學術研討會, 2013 (淡江大學 淡水 中華民國102年11月 30日)<PDF>
Tzong-Shyng Leu Yi-Ting Tsai, Jui-Ming Yo, Jiun-Jih Miau, Ta-Chung Wang, Chien-Chou Tseng, “A New Look of Wind Turbulence Effects on Wind Turbine Power Output by Using Hilbert Huang Transform”, EWEA OFFSHORE 2013, 19-21 November, 2013, Frankfurt, Germany
Ta-Chung Wang, Tzong-Shyng Leu, Jiun-Jih Miau, , Chien-Chou Tseng, , “Polynomial Modeling of Generic Wind Power Plants for Wind Power Forecasting”, EWEA OFFSHORE 2013, 19-21 November, 2013, Frankfurt, Germany
J. J. Miau, T. S. Leu, R. M. Yu, J. Y. Dai, J. K. Tu, C. T. Wang, V. Lebiga, D. Mironov, A. Pak, V. Zinovyev, and K. M. Chung, “MEMS thermal film sensors for flow research”, 8th International Symposium on Advanced Science and Technology in Experimental Mechanics, 3-6 November, 2013, Sendai, Japan
劉雅惠,呂宗行,"蚊子吸血機制發展仿生微幫浦",第20屆全國計算流體力學研討會, 2013
黃鼎鈞,呂宗行,"銅鰭片微管道進出口設計對流量均勻性的影響探討",第20屆全國計算流體力學研討會, 2013
高瑞鴻,呂宗行,鄭碩仁,"微流管紗線塗佈數值模擬",第20屆全國計算流體力學研討會, 2013
Tzong-Shyng Leu, Jui-Ming Yo, Yi-Ting Tsai, Jiun-Jih Miau, Ta-Chung Wang, Chien-Chou Tseng, "Assessment of IEC 61400-1 Normal Turbulence Model for Wind Conditions in Taiwan West Coast Areas",  The Fifth International Symposium on Physics of Fluids (ISPF5), Changbaisan, China, 2013 (invited talk)
T. S. Leu, C. F. Lin,“Experimental Studies of bubble dynamics with thermal bubble valve in micro nozzle channel”, 12th Asian Symposium on Visualization, 19-23 May, 2013, Tainan, Taiwan<PDF>
R. H. Kao, T. S. Leu, C. D. Kan,and W. L. Chen, “Numerical simulation of Blood flow in stent if thoracic aortic”, 12th Asian Symposium on Visualization, 19-23 May, 2013, Tainan, Taiwan
D. J. Huang, T. S. Leu, “The movement of water droplet and analysis on the fabricated wettability gradient surface”, 12th Asian Symposium on Visualization, 19-23 May, 2013, Tainan, Taiwan
翁志遠,呂宗行,“平板式迴路熱管設計之理論分析”, 2013中華民國燃燒學會第二十屆燃燒與能源學術研討會 (交通大學 新竹, 中華民國102年4月20日)

2012

游瑞名,呂宗行,苗君易,郭友山,林信安, "IEC 61400-1 標準紊流模型於臺灣西部濱海風況適用性之研究", 台灣風能學術研討會,2012 (交通大學 新竹 中華民國101年12月 19日)
高瑞鴻,呂宗行,甘宗旦,陳維聆,“胸腔主動脈支架血管流數值模擬", 航太學會學術研討會, 2012 (交通大學 新竹 中華民國101年12月 15日)
黃鼎鈞, 呂宗行,“利用過氧化氫進行銅表面改質的方法與梯度表面的製作", 航太學會學術研討會, 2012 (交通大學 新竹 中華民國101年12月 15日)
李承豫, 呂宗行,“閉迴路震盪型熱管實驗研究與其可視化流體行為分析", 航太學會學術研討會, 2012 (交通大學 新竹 中華民國101年12月 15日)
張煒詮, 呂宗行,“氣霧式微噴嘴製作螢光性粒子之研究", 航太學會學術研討會, 2012 (交通大學 新竹 中華民國101年12月 15日)
Yuan-Shiang Tsai, Su-Hua Chen, Jiun-Jih Miau, Tzong-Shyng Leu, Li-Wen Wang, "Wind speed characteristics in Sin-Da Habour", Proceedings of the 34th Ocean Engineering Conference in Taiwan (第34屆海洋工程研討會), Nov. 2012
Jing-Fung Lin, Tzong-Shyng Leu, Meng-Zhe Lee, "Surface Electrode Induced Birefringence in PLZT10/30/70 Film with PLT Layer", 29屆機械工程研討會, 2012
J. M. Yu, T. S. Leu, C. C. Hu, T. L. Chen, J. J. Miau, Y. D. Tsai, S. Y. Liang, S. J. Chen, and J. C. Cheng, “PIV Measurement of Unsteady Flow Field above an Airfoil Pitching at Different Waveform Conditions”, 7th International Symposium on Advanced Science and Technology in Experimental Mechanics, 8-11 November, 2012, Taipei, Taiwan
Tzong-Shyng Leu, Ding-Jun Huang, “Fabrication of Copper Gradient Surface for Condensation Heat Transfer Applications ”, 7th International Symposium on Advanced Science and Technology in Experimental Mechanics, 8-11 November, 2012, Taipei, Taiwan
Tzong-Shyng Leu, Shun-Yi Li, Yei-Chin. Chao, Tsarng-Sheng Cheng, "Scaling Issues of Micro Catalytic Reactors", The 2nd International Conference on Engineering and Technology Innovation 2012 (ICETI2012), Kaohsiung, Taiwan, Nov. 2~6, 2012
J. J. Miau, S. Y. Liang, R. M. Yu, C. C. Hu, and T. S. Leu, J. C. Cheng, and S. J. Chen, "Design and test of a vertical-axis wind turbine with pitch control", AEROTEC IV,  Kuala Lumpur, Malaysia, 2012
T. S. Leu, J. M. Yu,  C. C. Hu, J. J. Miau, S. Y. Liang, J. Y. Li, S. J. Chen, and J. C. Cheng, "Experimental Study of Free Stream Turbulence Effects on Dynamic Stall of a Pitching Airfoil by using Particle Image Velocimetry", AEROTEC IV,  Kuala Lumpur, Malaysia, 2012
Tzong-Shyng Leu‚ Yan-Hao Liu, "Design and Fabrication of Thermocapillary Micro Bubble Pump", 2012 International Conference on Frontier of Nanoscience and Technology (ICFNST 2012), Hong Kong, July 26-27, 2012
呂宗行,高瑞鴻,"不同仰角之NACA0015及 NACA LS0417葉片於垂直軸風力機之性能研究",第19屆全國計算流體力學研討會, 2012
M. S. Ozhgibesov, T. S. Leu, C. H. Cheng, A. V. Utkin, V. M. Fomin, I. F. Golovnev, “Numerical Studies of Flows Through Micro- and Nano - channels with different Boundary Conditions”, The 17th International Conference on Methods of Aerophysical Research (ICMAR 2012), Kazan, Russia, Aug. 20~26, 2012
M. S. Ozhgibesov, T. S. Leu, C. H. Cheng, A. V. Utkin, "Molecular Dynamics Simulations of Rarefied Gas flow Through Tungsten Nanochannel Using Graphics Processing Units", 19th National CFD Conference, Penghu, Taiwan, August 16-18, 2012
黃鼎鈞,呂宗行,“利用三氯化鐵與鐵氟龍於銅表面上作超疏水表面的方法”, 2012中華民國燃燒學會第二十二屆燃燒與能源學術研討會 (高苑科技大學 高雄, 中華民國101年4月21日)
 

2011

J. M. Yu, T. S. Leu, C. C. Hu, J. J. Miau, Y. D. Tsai, S. Y. Liang, S. J. Chen, and J. C. Cheng, "Investigation of Unsteady Flow Field above an Airfoil Pitching at Different Waveform Conditions by using Particle Image Visualization Techniques", The 11th International Conference on Fluid Control, Measurements and Visualization (FLUCOME 2011), Keelung, Taiwan, 2011
胡志忠, 陳子良, 梁士毅, 傅忠平, 何春華, 蔡易達, 游瑞名,苗君易, 呂宗行, 鄭仁杰, 陳時鈞, 郭友山, "垂直軸風力機可調式俯仰角之設計及研究", 台灣風能學術研討會,2011
J. J. Miau, Y. D. Tsai, J.C. Cheng, T. S. Leu, R. M. Yu, S. Y. Liang, S. J. Chen, and C. C. Hu, "On unsteady flow around a vertical axis wind turbine, The 11th International Conference on Fluid Control, Measurements and Visualization (FLUCOME 2011), Keelung, Taiwan, 2011
游瑞名, 呂宗行, 胡志忠, 苗君易, 蔡易達, 梁士毅, 鄭仁杰, 陳時鈞,"以葉片俯仰運動模擬垂直軸風力機轉動之非定常流場量測,中華民國力學學會第三十五屆全國力學會議, 2011
J. F. Lin and T. S. Leu, “Measurement of Electro-optic Effect in Sol-gel-derived PLZT Thin Films," TACT 2011, International Thin Films Conference,  Nov. 20~23, 2011, Kenting, Taiwan
Tzong-Shyng Leu a‚ Yan-Hao Liu, "Studies of Thermal Bubble Pump in a Microchannel Loop", 10th International Heat Pipe Symposium 6-9 November, 2011, Taipei, Taiwan
林青鋒, 李承豫, 呂宗行,“微噴嘴管道內熱泡式閥門作用下汽泡動力之實驗探討", 航太學會學術研討會, 2011 (逢甲大學 台中 中華民國100年11月 5日)
龔鼎琮 潘大知 呂宗行,"串聯與並聯型蠕動微幫浦之微管道深度參數探討", 航太學會學術研討會, 2011 (逢甲大學 台中 中華民國100年11月 5日)
劉彥豪呂宗行楊承翰, "開放式微管道迴路內熱泡驅動機制之實驗探討", 航太學會學術研討會, 2011 (逢甲大學 台中 中華民國100年11月 5日)
T. S. Leu, “Mixing Layer Control by Suction at Trailing Edge”, 6th International Symposium on Advanced Science and Technology in Experimental Mechanics, 3-5 November, 2011, Osaka, Japan
J. M. Yu, T. S. Leu, C. C. Hu, J. J. Miau, Y. D. Tsai, S. Y. Liang, S. J. Chen, and J. C. Cheng, “PIV Measurement of Unsteady Flow Field above an Airfoil Pitching at Different Waveform Conditions”, 6th International Symposium on Advanced Science and Technology in Experimental Mechanics, 3-5 November, 2011, Osaka, Japan
M. S. Ozhgibesov, A. V. Utkin, F. M. Fomin, T. S. Leu, C. H. Cheng, "Simulation of cold copper depositionon the contaminated surface using gaming GPU", 6th Conference of the Asian Consortium on Computational Material Science, Singapore, 2011
M. S. Ozhgibesov, A. V. Utkin, 呂宗行, 鄭金祥, "利用GPU計算銅晶格之分子動力模擬", 第18屆全國計算流體力學研討會, 2011
鄭仁杰, 簡廷瑋, 蕭亦筌, 周玴逸, 高偉庭, 苗君易, 胡志忠, 呂宗行,"最佳葉片固定仰角應用於垂直軸風力機之數值研究",第18屆全國計算流體力學研討會, 2011
鄭仁杰, 黃國源, 黃國彰, 許耿豪, 許信傑, 苗君易, 胡志忠, 呂宗行,"以數值探討Gurney Flap應用在垂直軸風力機之空氣動力特性",第18屆全國計算流體力學研討會, 2011
Tzong-Shyng Leu, and Ching-Yi Pai ,"Particle-Free Extraction by Using Microchannel Structures",  The Fourth International Symposium on Physics of Fluids (ISPF4), Lijiang, China, 2011 (invited talk)
Tzong-Shyng Leu, Zhi-Feng Liao, "Separating Plasma and Blood Cells by Dielectrophoresis in Microfluidic Chips", The Fourth International Symposium on Physics of Fluids (ISPF4), Lijiang, China, 2011

2010

Tzong-Shyng Leu, Pin-Chin Jiang, "Fe-PDMS Fabricated Microchannels for Peristaltic Pump Applications", 5th IEEE International Conference of Nano/Micro Engineered and Molecular Systems, 2010
Tzong-Shyng Leu, Chin-Tsan Wang and Jui-Ming Yu, "Elimination of Initial Filling and Newton Ring in Micro Capillary Pumped Loop by Micro-matrix Posts", 5th IEEE International Conference of Nano/Micro Engineered and Molecular Systems, 2010
Chin-Tsan Wang, Tzong-Shyng Leu and Nan-Jia Huang, "Thermal-bubble motion in microchannel", 5th IEEE International Conference of Nano/Micro Engineered and Molecular Systems, 2010
Tzong-Shyng Leu, Pin-Chin Jiang, "Microfabrication of Fe-PDMS Structures for Microfluidic Application", International Conference on Advanced Manufacture, 2010
高瑞鴻,呂宗行,王金燦,“微管道內無動件閥微幫浦最佳化設計與Fe-PDMS複合薄膜操作", 2010中華民國燃燒學會第二十屆燃燒與能源學術研討會(崑山科技大學 台南、永康, 中華民國九十九年三月二十日)
黃國瑞,吳增昕,呂宗行,“表面改質技術應用於 梯度 表面之冷凝熱傳實驗探討”, 2010中華民國燃燒學會第二十屆燃燒與能源學術研討會 (崑山科技大學 台南、永康, 中華民國九十九年三月二十日)
M. S. Ozhgibesov, I. F. Golovnev, T. S. Leu, C. H. Cheng, “Molecular Dynamics Studying of Argon Atoms Scattering on a Copper Surface”, The 15th International Conference on Methods of Aerophysical Research (ICMAR 2010), Novosibirsk, Russia, Nov. 1~6, 2010
高瑞鴻,呂宗行“Fe-PDMS 製作之無動件閥微幫浦設計與操作", 航太學會學術研討會, 2010 (開南大學 桃園, 中華民國九十九年十二月 四日)
簡慶德,劉彥豪,呂宗行“F微管道內汽液兩相流之實驗探討", 航太學會學術研討會, 2010 (開南大學 桃園, 中華民國九十九年十二月 四日)
謝俊億,許智偉,楊承翰,呂宗行“以數值方法探討Dyson 公司無扇葉風扇設計與性能", 航太學會學術研討會, 2010 (開南大學 桃園, 中華民國九十九年十二月 四日)
黃信文,蔡易達,苗君易,陳時鈞,呂宗行,鄭仁杰,胡志忠,“紊流場與均勻流場對垂直軸風機影響之研究”, 2010臺灣風能學術研討會 (國立澎湖科技大學 臺灣.澎湖, 中華民國九十九年十二月十七日)

2009

呂宗行,柯伯臻“有機聚合物光感測器之研究與發展", 中國航太學會/中華民航學會聯合學術研討會, 2009
Mikhail Ozhgibesov, Chin-Hsiang Cheng, Tzong-Shyng Leu, "Studies of Knudsen Compressor by Molecular Dynamic Method", 三十三屆全國力學學會年會暨力學研討會, 2009
Tzong-Shyng. Leu , Horng-Jiann Song, “New Pumping Mechanism by Surface Waves in a Microchannel”, Proceeding of  4th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2009
Chin-Tsan Wang, Tzong-Shyng Leu, Jui-Ming Yu, "THERMAL ANALYSIS OF MICRO CAPILLARY PUMPED LOOP SYSTEM", 6th WSEAS International Conference on Heat and Mass Transfer, Ningbo, China, Jan. 10-12, 2009
Tzong-Shyng Leu, and Chun-Lin Kuo, Jeng-Ren Chang, "Experimental Investigation of Slenderness Effects on Side Force of Slender Body", The Third International Symposium on Physics of Fluids (ISPF3), Jiuzhaigou, China, 2009
Tzong-Shyng Leu, Hung-Wen Lin, Tseng-Hsin Wu, "Applications of Surface Modification Techniques In Enhancement of Phase Change Heat Transfer", The Third International Symposium on Physics of Fluids (ISPF3), Jiuzhaigou, China, 2009
Chin-Tsan Wang, Tzong-Shyng Leu, Jui-Ming Yu, Yuh-Chung Hu, THERMAL ANALYSIS OF MICRO CAPILLARY PUMPED LOOP SYSTEM, The 7th International Conference on Nanochannels, Microchannels and Minichannels, Pohang, Sourth Korea, June 22-24, 2009.

2008

黃南嘉、簡慶德、王金燦、呂宗行, "熱泡式微泵浦元件製程問題改善", 中國機械工程學會第二十 五屆全國學術研討會, 2008
宋宏建、吳俊賢、呂宗行、陳鴻瑩, "應用於介電泳場流分離法之平板波幫浦", 中國機械工程學會第二十 五屆全國學術研討會, 2008
Ching-Te Huang, Po-Ni Li, Chun-Ping Jen, Tzong-Shyng Leu, and Wen-Chieh Wu, "Design and Simulation of the Microfluidic Blood-plasma Separation Chip Utilizing Hydrodynamic Filtration, " 2nd IEEE-NANOMED, Suzhou, China,  2008
Tzong-Shyng LEU , Chun-Lin KUO and Jeng-Ren Chang, "MEMS Fabricated Micro Balloon Actuator for Side Force Reduction on a Cone-Cylinder Slender Body, " 3rd International Symposium on Advanced Fluid/Solid Science and Technology in Experimental Mechanics, Tainan, Taiwan, 2008
Tzong-Shyng Leu , Horng-Jiann Song, Chih-Yuan Weng  , "Studies of Flexible Plate Wave Pumped DEP-FFF Micro Sorter, " 34th International Conference on Micro and Nano Engineering (MNE 2008) , Athens, Greece 2008
Tzong-Shyng Leu , Chih-Yuan Weng , "DYNAMICS OF DIELECTROPHORETIC FIELD-FLOW FRACTIONATION (DEP-FFF) BASED MICRO SORTER FOR CELL SEPARATION, " The Second International Symposium on Physics of Fluids (ISPF2), Nanjing, China, 2008
Tzong-Shyng Leu, Jan-Hua Lin, "Investigation of Piezoelectric Inkjet Printhead Meniscus Dynamic Behaviors, " NSC-RFBR Joint Symposium, Novosibirsk/Tomsk, Russia, July 3-8, 2008
M.S. Ozhgibesov, T.S. Leu, C.H. Cheng and I.F. Golovnev, "MODELING OF GAS DYNAMIC PROCESSES INSIDE THE NANO- AND MICROCHANNELS BY MOLECULAR DYNAMIC METHOD, " Asia-Pacific Conference On Transducers and Micro-Nano Technology Conference, Tainan, Taiwan,  2008
T.S. Leu, C.Y. Weng, "STUDIES OF PARTICLE LEVITATION IN A DEP-FFF BASED MICRO SORTER, " Asia-Pacific Conference On Transducers and Micro-Nano Technology Conference, Tainan, Taiwan,  2008
Tzong-Shyng. Leu, Tseng-Hsin Wu, “Droplet Movement on a Vertical Gradient Surface”, 3RD IEEE INTERNATIONAL CONFERENCE ON NANO/MICRO ENGINEERED AND MOLECULAR SYSTEMS, VOLS 1-3 Pages: 610-615 , 2008

2007

Tzong-Shyng Leu, Jan-Hua Lin, “Experimental Studies of Meniscus Dynamic Behaviors in a Squeeze Mode Piezoelectric Inkjet Printhead”, International Conference of  Advanced Manufacture,  (ICAM-2007), Tainan, Taiwan
游瑞名, 黃南嘉 ,王金燦,呂宗行, "微型毛細吸環路之 系統分析及元件設計", 中國機械工程學會第二十 四屆全國學術研討會, 2007
Tzong-Shyng Leu, Chung-I Lin, Jer-Wei Kuo “Numerical Studies of Flow Dynamics in a Squeeze-Mode Piezoelectric Inkjet Printhead”, The 11th Annual Conference on Liquid Atomization and Spray Systems - Asia, 2007
呂宗行, 翁志遠,“介電泳場流分離法之漂浮高度的數值模擬與實驗研究", 空軍官校航空太空工程學術研討會, 2007
吳增昕,呂宗行,“利用表面改質技術應用於 表面梯度冷凝板之熱傳實驗探討”, 2007中華民國燃燒學會第十燃燒與能源學術研討會 , March, 2007
Min-Chien Tsai , Tzong-Shyng. Leu, “The Study of Flexible Plate Wave Device for Micro Pumping System”, Proceeding of  IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2007 (EI)
Tzong-Shyng. Leu, Yao-Jen Kuo, “Numerical Simulation and Optimal Design on a new Dielectrophoretic-based Cytosorter”, Proceeding of  IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2007 (EI)
Tzong-Shyng. Leu, Hung-Ying Chen, and Fei-Bin Hsiao, “Micro Sorters with 3D Focusing and Continuous Sorting”, Proceeding of  IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2007 (EI)

2006

翁志遠、呂宗行,"介電泳場流粒子分離法之數值模擬與研究", 中國航太學會/中華民航學會聯合學術研討會,2006

張政仁、呂宗行、郭俊麟,"細長比對彈體高攻角側向力特性影響之探討 ", 中國航太學會/中華民航學會聯合學術研討會,2006
王覺寬、楊坤和、呂宗行、楊哲睿, "雙流體內混式微型霧化系統之研製及霧化機構研究 ", 中國航太學會/中華民航學會聯合學術研討會,2006

王金燦、呂宗行、游瑞名,"微型毛細式幫吸環路系統設計與製程問題之改善", 中國機械工程學會第二十 三屆全國學術研討會, 2006

孫嘉鳴、呂宗行、王金燦、王波平,"微流道無動件噴嘴口效應分析", , 中國機械工程學會第二十三屆全國學術研討會, 2006

Tzong-Shyng Leu, Jeng-Ren Chang, and Chun-Lin Kuo, “Experimental Investigation of Slenderness Effect on Side Force of Slender Body”, The 5th Taiwan-Indonesia Workshop on Aeronautical Science, Technology and Industry, Tainan, Taiwan, Nov. 13-16, 2006

呂宗行、陳鴻瑩、蕭飛賓,"以數值模擬及實驗研究三維聚焦並分類的微流晶片", 第九屆全國機構與機器設計學術研討會暨 2006 年海峽兩岸機構學學術研討會, 2006

Tzong-Shyng Leu, and Jan-Hua Lin, “Meniscus Dynamic Behaviors in a Squeeze Mode Piezoelectric Inkjet Device”, International Congress of Liquid Atomization and Spray System, Aug. 27~Sep. 1, 2006 (ICLASS-2006), Kyoto, Japan
M. R. Wang, C. H. Chiu, Y. J. Shen, T. S. Leu, Y. Z. Wang, “Development of Needle-Free Jet with Twin-Fluid Atomization Processes”, International Congress of Liquid Atomization and Spray System, Aug. 27~Sep. 1, 2006 (ICLASS-2006), Kyoto, Japan
M. R. Wang, K. H. Yang, T. C. Lin, T. S. Leu, C. J. Yang, “Atomization Performance of Twin-Fluid Micro-Injectors with Micro-Mixing Mechanism”, International Congress of Liquid Atomization and Spray System, Aug. 27~Sep. 1, 2006 (ICLASS-2006), Kyoto, Japan
 林宏文,吳增昕,呂宗行,“表面改質技術應用於冷凝熱傳之實驗探討”, 2006中華民國燃燒學會第十燃燒與能源學術研討會, March, 2006
Tzong-Shyng. Leu, Hung-Wen Li, “Enhancement of Phase Change Heat Transfer by using Surface Energy Patterning Techniques”, The 1st IEEE International Conference on Nano/Micro Engineered and Molecular Systems (1st IEEE-NEMS), 2006
Tzong-Shyng Leu, J. Shimada, “Numerical and Experimental Study of Light Induced DEP Tweezers”, The 2nd International Meeting on Microsensors and Microsystems, 2006
Tzong-Shyng Leu, Hung-Ying Chen, and Fei-Bin Hsiao, “Numerical and Experimental Study of 3D Focusing in Microfluidic Chips”, The 2nd International Meeting on Microsensors and Microsystems, 2006
Tzong-Shyng Leu, Yao-Jen Kuo, B. P. Wang, “Optimal Design of the Electrodes in Dielectrophoretic Flow Sorter”, The 2nd International Meeting on Microsensors and Microsystems, 2006
Tzong-Shyng Leu, Jia-Ming Sun , Chin-Tsan Wang and Bo-Ping Wang, “An Optimal Simulation Analysis On No-Moving-Part Valves (NMPV) In Microchannel”, The 2nd International Meeting on Microsensors and Microsystems, 2006
Chin-Tsan Wang, Tzong-Shyng Leu and Jia-Ming Sun, “Asymmetric flow Effect of simple duct channel on Pumping Performance”, The 2nd International Meeting on Microsensors and Microsystems, 2006

2005

郭俊麟, 張政仁,呂宗行,“陣列式微泡致動器應用於減低彈體高攻角側向力之研究,” 中國航太學會/中華民航學會聯合學術研討會,2005
Tzong-Shyng Leu, J. Shimada, Development of Light Induced DEP Tweezers,中國機械工程學會第二十二屆全國學術研討會, 2005
郭耀仁,呂宗行, 利用介電泳動力設計細胞分類晶片及數值分析, 中國機械工程學會第二十二屆全國學術研討會, 2005
蔡旻謙,呂宗行,”利用介電泳力於微/奈米粒子自組裝之研究,” 中國機械工程學會第二十二屆全國學術研討會, 2005
王金燦,呂宗行,賴蔡明,游瑞名,微型毛細式幫吸環路系統啟動之研究 中國機械工程學會第二十二屆全國學術研討會, 2005
孫嘉鳴、王金燦、呂宗行, “ 以數值分析法分析無動件閥微型幫浦模擬" ESI CFD User Conference 2005
Tzong. Shyng. Leu, Chi-Hsiung Teng, “Design, Fabrication and Study of Micro-Electrospray Chips, ” International Conference on Advanced Manufacture (ICAM 2005). Nov. 28~Dec. 2, 2005
Muh-Rong Wang, K. H. Yang, J. S. Chiu, Deng-Sang Lai, T. S. Leu, S. C. Chen, "Characterization of Twin-Fluid Micro Atomizer with Internal Mixing Mechanism", The 10th Annual Conference on Liquid Atomization and Spray System- Saia, Seoul, Korea, Oct. 13~14, 2005
王金燦、呂宗行、孫嘉鳴,"直管徑微型馬達模擬分析" 中國工業工程研討會, 2005
T. S. Leu, Shun-Yi Li, “Operation Limits of Micro Catalytic Combustors,” IEEE International Conference on Robotics and Biomimetics (IEEE ROBIO), June 29~July 3, 2005, Hong Kong (The best Conference Paper Award)
王金燦、呂宗行、賴蔡明, "漸縮微管道壓力梯度之理論分析"第12屆三軍官校基礎學術研討會, 2005
孫嘉鳴、呂宗行、王金燦,"微管道無動件閥設計分析"第12屆三軍官校基礎學術研討會, 2005
Muh-Rong Wang, Kuen-Ho Yang, Deng-Sang Lai, Yan-Shen Huang and T. S. Leu, " Characterization of Twin-Fluid Micro Atomizer with Internal Impinging Mechanism", 成大-中山微奈米科技聯合成果發表會, June 24, 2005
蔡旻謙,呂宗行, “利用介電泳動力於乳膠粒子之排列與自組裝,” 2005精密機械與製造技術研討會, May 20~22, 2005
林宏文,呂宗行, “冷凝板上之表面改質技術及薄膜冷凝系統之實驗探討,”2005精密機械與製造技術研討會, May 20~22, 2005
郭耀仁、呂宗行, “新型粒子分類晶片的設計與數值分析,” 2005精密機械與製造技術研討會, May 20~22, 2005
孫嘉鳴、呂宗行、王金燦,"無動件閥流道模擬分析"精密機械與製造技術研討會, 2005
Tzong-Shyng Leu, Hung-Ying Chen, Fei-Bin Hsiao, “The Design of Micro Sorters,” 2005精密機械與製造技術研討會, May 20~22, 2005
Chin-Tsan Wang , Tzong-Shyng Leu and Jia-Ming Sun, ”Optimal Operation Analysis of Micropump Based on Valve with No Moving Part”,精密機械與製造技術研討會, 2005
賴蔡明,呂宗行,王金燦, “微漸縮道壓力梯度理論分析應用於開發微封閉式迴路冷卻系統,” 2005精密機械與製造技術研討會, May 20~22, 2005
郭俊麟,呂宗行, “細長比對於彈體之氣動力影響,” 2005精密機械與製造技術研討會, May 20~22, 2005
Tzong-Shyng Leu and J. Shimada, “Development of Optoelectronic Tweezers,” The 12th Symposium on Nano Device Technology (SNDT 2005)
呂宗行, 鄧吉雄,”微電灑晶片的設計、製造及噴灑模態之研究, 2005中華民國燃燒學會第十燃燒與能源學術研討會, March 26, 2005
呂宗行, 林宏文,”表面能量處理技術之研發及其在冷凝液滴回收系統中的應用,2005中華民國燃燒學會第十燃燒與能源學術研討會, , March 26, 2005
王覺寬, 楊坤和, 呂宗行,”雙流體內混式微型噴嘴之霧化特性”中華民國燃燒學會學術研討會, March 26, 2005
Leu Tzong-Shyng, Chen Hung-Ying, Hsiao Fei-Bin, “A NEW TOOL for Multidisciplinary Education and Research,” International Conference of Engineering Education and Research, iCEER2005, March 1~5, 2005

2004

T. S. Leu, Shun-Yi Li, , Y. C. Chao , T. S. Cheng, ”Design and Test of Micro-catalytic Combustors for Use in Microthrusters,”中國航太學會/中華民航學會聯合學術研討會,2004
孫嘉鳴 王金燦, 呂宗行,”微管道無動件閥之設計分析”,中國航太學會/中華民航學會聯合學術研討會,2004
孫嘉鳴、王金燦、呂宗行, "非定常流對微管道無動件閥效應分析"中國航太學會/中華民航學會聯合學術研討會, 2004
孫嘉鳴、王金燦、呂宗行, "應用數值摸擬法分析微管道無動件閥"第二十八屆全國力學學會年會暨力學研討會, 2004
T. S. Cheng, Y.-C. Chao, C.-Y. Wu, Y.-H. Li, T. Yuan, T. S. Leu, and Y. Nakamura ,”The Application of Laser Diagnostic Techniques for Temperature and Species Concentration Measurements in Microjet Flames,” 中國航太學會/中華民航學會聯合學術研討會,2004
Tzong-Shyng Leu, Hung-Ying Chen, and Fei-Bin Hsiao,” Characterization of Dielectrophoretic Flow Sorters,”第八屆奈米工程暨微系統技術研討會, 2004
Tzong-Shyng Leu, Jeng-Ren Chang, and Pong-Jeu Lu,” Side Force Reduction of Cone-Cylinder at High Angles-of-Attack Using Micro Balloon Array Actuator,” 中國機械工程學會第二十一屆全國學術研討會, 2004
陳鴻瑩, 呂宗行, 蕭飛賓, “微機電技術製作之微流分類器模擬與分析”, 全國計算流體力學學術研討會,2004
Tzong-Shyng Leu; Yei-Chin CHAO; Yun-Che WEN; Yu-Jane WU, “Teaching Micro System Design by using Multi-User Micro Avionics System Laboratory in Aerospace Educational Reform Program of Taiwan,” International Conference on Engineering Education and Research, iCEER 2004, Olomouc, Czech Republic
Yun-Che Wen, Yei-Chin Chao, Tzong-Shyng Leu and Yu-Jane Wu, “Self-Test Designs in Devices of Avionics”, International Conference on Engineering Education and Research, iCEER 2004, Olomouc, Czech Republic
Y.-C. Wen, C. I. Cheng, Y.-C. Chao, Tzong-Shyng Leu, “Innovation in avionics engineering education and curriculum design”, EISTA '04: International Conference on Education and Information Systems: Technologies and Applications, Vol 3, Proceedings - EDUCATION/TRAINING AND INFORMATION/COMMUNICATION TECHNOLOGIES AND APPLICATIONS, Pages: 345-348,  2004 
  T. S. Leu , Shun-Yi Li , J. R. Hsu , Y. C. Chao , T. S. Cheng, ” Scaling Issues on the Design of Micro Catalytic Reactors,” 2004中華民國燃燒學會第十燃燒與能源學術研討會, , 2004
呂宗行、林郁欣,”新型噴墨頭製造及其診斷技術於三維快速成型精密製造應用, 2004中華民國燃燒學會第十燃燒與能源學術研討會, 2004

2003

Leu, T-S, and  Li, S-Y,On-Chip Temperature Measurement of Micro Catalytic Combustors, 第十屆國科會航空太空學門研究成果研討會, Dec. 12-13, 2003
呂宗行、陸鵬舉、張政仁,可撓性微泡致動器應用於彈體側向力控制之研究”, 第十屆國科會航空太空學門研究成果研討會, Dec. 12-13, 2003
呂宗行, 微機電技術在飛行控制系統之應用”, 國防工業發展基金會委託教育機構九十一年度合作研究計畫成果發表會, Oct 2, 2003
呂宗行,“微機電組件之研發與在飛行載具之應用”,飛行載具研發技術之現況與展望研討會, Sep 29, 2003
Leu, T-S, and Chang, P-Y, ”Pressure Barrier of Capillary Stop Valves in Micro Sample Separators,17th European Conference on Solid State Transducers, EUROSENSORS XVII, September. 21-24, 2003, Guimaras, Portugal (NSC 91-2212-E-006-138)
Leu, T-S, Li, S-Y, and Liao, R-R, ”Development of Micro Catalytic Combustor for MEMS Power Generation ,17th European Conference on Solid State Transducers, EUROSENSORS XVII, September. 21-24, 2003, Guimaras, Portugal (NSC 91-2212-E-006-124)
 Leu, T-S, Chao, Y-C, Wen, Y-C and Wu, Y-J, “Cost-Effective Multi-User Micro Avionics System Laboratory (MASL) Project in Aerospace Educational Reform Program of Taiwan” International Conference on Engineering Education, July 21-25, 2003, Valencia, Spain

 Leu, T-S, Chao, Y-C, Li, S-Y and Liao, R-R, “Development of Micro Catalytic Combustors”, 19th International Colloquium on the Dynamics of Explosions and Reactive Systems, July 27 - August 1, 2003, Hakone, Kanagawa, Japan

Y. C. Chao, J. R. Hsu , G. B. Chen, C. Y. Wu, and T. S. Leu, “Laser Raman Measurement and Numerical Studies of Combustion in Catalytic Micro-Tubes”, 19th International Colloquium on the Dynamics of Explosions and Reactive Systems, July 27 - August 1, 2003, Hakone, Kanagawa, Japan
呂宗行、廖仁瑞, 應用於電子元件對衝流冷卻研究之白金溫度感測器製程技術發展”, 2003精密機械與製造技術研討會, May 30-June 1, 2003 (NSC 90-2212-E-006-159)
李順義、呂宗行,微觸媒反應系統之設計與製作”, 2003精密機械與製造技術研討會, May 30-June 1, 2003 (NSC 91-2212-E-006-124)
鄧吉雄、呂宗行, “微奈米多孔矽的製作及其於微觸媒反應系統應用”, 2003精密機械與製造技術研討會, May 30-June 1, 2003
張珮郁、呂宗行,微機電製作之實驗光碟晶片用於生物晶片的研究發展”, 2003精密機械與製造技術研討會, May 30-June 1, 2003 (NSC 91-2212-E-006-138)
張政仁、呂宗行,”可撓性微泡致動器之製造及應用”,2003精密機械與製造技術研討會, May 30-June 1, 2003
林郁欣、呂宗行,”噴墨頭噴印精進技術於三維快速成型精密製造應用”, 2003精密機械與製造技術研討會, May 30-June 1, 2003
呂宗行、廖仁瑞、李順義、趙怡欽、許家睿、袁曉鋒, 微機電技術製作之白金觸媒微管道反應系統”, 2003中華民國燃燒學會第十三屆燃燒與能源學術研討會, 2003 (NSC 91-2212-E-006-124)
 Cheng, T. S., Chao , Y.-C., Wu, C.-Y., Chen , G.-B., Yuan , T., and Leu T. S., “Raman-LIPF Measurements of Temperature, Major species, and OH in a Laminar Hydrogen Jet Diffusion Flame, 2003中華民國燃燒學會第十三屆燃燒與能源學術研討會, 2003
鄭藏勝、趙怡欽、吳志勇、陳冠邦、袁曉峰、呂宗行,應用雷射診測技術於微反應系統之初步研究”, 2003中華民國燃燒學會第十三屆燃燒與能源學術研討會, 2003

2002

Leu, T. S., Ma , F.C.,” Design and Microfabrication of Electrohydrodynamic Micro Mixers”, THE 26th NATIONAL CONFERENCE ON THEORETICAL AND APPLIED MECHANICS, Hu-Wei, Taiwan, R. O. C., 20-21 December 2002 (NSC 89-2212-E-006-148)
 Leu, T. S., Chang J-R,“MEMS-Based Flexible Micro Balloon Actuators in Forebody Aerodynamic Control Applications”, International Symposium on Experimental Mechanics (ISEM), 2002, Taipei, Taiwan, Republic of China
Leu, T. S., Ma, F-C, “Novel EHD-Pump Driven Micro Mixers”, International Conference on Micro & Nano Systems ICMNS 2002, August 11-14, 2002, Kunming, China (NSC 89-2212-E-006-148)
Leu, T. S., Lu, P-J, Chao, Y-C, “Multi-User Micro Avionics System Service (MASS) Project for Aerospace Educational Reform Program”, 2002 IEEE/ASME International Conference on Advanced Manufacturing Technologies and Education in the 21st Century, AMTE Conference 2002
Leu, T. S., Lu, P-J, Chao, Y-C , “Avionics Educational Resource Center for University-Industry Strategic Alliances in Aerospace Educational Reform Program”, 2002 IEEE/ASME International Conference on Advanced Manufacturing Technologies and Education in the 21st Century, AMTE Conference 2002
Chao, Y-C, Leu, T. S. , “A Feasibility Study of Catalytically Stabilized Gas Phase Combustion in a Micro-Combustor” , Symposium WIPP in 29th International Symposium On Combustion, Sapporo, Japan, 2002 (NSC 90-2212-E-006-159)
呂宗行, 張政仁微機電技術在飛行控制系統之應用”, 國防工業發展基金會委託教育機構九十年度合作研究計畫成果發表會, 2002
呂宗行、陸鵬舉、張政仁,“可撓性微泡致動器在前彈體飛行控制之應用”「民航學會/航太學會/燃燒學會」學術聯合會議, 2002

2001

吳智豪, 李國賓, 苗君易, 黃富駿, 呂宗行,, 林裕城, ” 可撓式溫度感測器陣列,“The 18th National Conference on Mechanical Engineering, The Chinese Society of Mechanical Engineers, 2001.
林哲信, 李國賓, 洪振益, 陳國祥, 袁曉峰, 呂宗行, ” SU-8厚膜光阻製造微推進器噴嘴之研究, The 18th National Conference on Mechanical Engineering, The Chinese Society of Mechanical Engineers, 2001.
Leu, T. S., Lanzillotto, A-M, "The Development of the Fastest X-ray Micro Imaging Facility in the World and its Applications in Fluidic MEMS" The Fourth Pacific International Conference on Aerospace Science and Technology (PICAST4), Kaohsiung, Taiwan, June 2001.

1995 ~ 2000

Dunsmuir, J., Zhou, M., Flannery, B., Amabile, M., Lanzillotto, A-M, Leu, T. S., Samtaney, R., Wilds, R., "Synchrotron Microtomography: System Design and Application to Fluids in Small Channels", in SPIE, 1997
Ravi Samtaney, Ann-Marie Lanzillotto, Tzong-Shyng Leu, Michael Amabile, Richard Wildes,Flow Experiments in MEMS”, APS/DFD Meeting, 1997
John H. Dunsmuir, Minyao Zhou, Brian P. Flannery, Michael Amabile, Tzong-Shyng Leu, Ravi Samtaney, Richard P. Wildes, “Synchrotron microtomography: system design and application to fluids in small channels”, SPIE Proceedings Vol. 3149, p.82~89, Developments in X-Ray Tomography Editor(s): Ulrich Bonse, Univ. of Dortmund, Dortmund, Germany. ISBN: 0-8194-2571-0, 276 pages Published 1997, Meeting Date: 07/27 - 08/01/97, San Diego, CA, USA
Lanzillotto, A-M, Leu, T. S., Amabile, M., Samtaney, R., Wilds, R., "A Study of Structure and Motion in Fluidic Microsystems", 4th AIAA Shear Flow Control Conference, Paper No. AIAA-97-1790, Snowmass Village, Colorado, USA, June 29-July 2, 1997.

Leu, T. S., Lanzillotto, A-M, Amabile M., Wilds R., "Analysis of Fluidic and Mechanical Motion in MEMS by using high speed X-ray Micro-Imaging Techniques" Transducers'97, Chicago, Illinois, June 1997.

Wildes, R. P., Amabile, M. J., Lanzillotto, A. M., Leu, T. S., "Experiments with an Algorithm for Recovering Fluid Flow from Video Imagery," In Proc. DARPA IV Workshop, 1997.
Wildes, R., Amabile, M., Lanzillotto, A. M., Leu, T. S., "Physically based fluid flow recovery from image sequences,"  Conference on Computer Vision and Pattern Recognition (CVPR '97) June 17 - 19, 1997 Puerto Rico
Lanzillotto, A.M., Leu, T. S., Amabile, M, Wildes, R. and Dunsmuir, J.H., "An Investigation of Microstructure and Microdynamics of Fluid Flow in MEMS," 1996 ASME International Mechanical Engineering Congress and Exposition AD-Vol. 52, p.789,  Proceedings of the ASME Aerospace Division, ASME 1996.
Leu, T. S., Lanzillotto, A-M, Amabile M., Wilds, R., "X-ray Micro-Imaging Velocimetry"  Bulletin of 49th Annual Meeting of the Division of Fluid Dynamics of the American Physical Society,Syracuse, New York, USA, November 1996
Lanzillotto, A-M, Leu, T. S., Amabile M., Wilds R., "Applications of Micro Imaging, Analysis and Visualization Techniques in MEMS " Sensor & Actuator Workshop, Hilton Head, South Carolina, June 1996
Lanzillotto, A-M, Amabile M., Leu, T. S., "3D Micro-Imaging and Visualization of Fluid Transport in Microelectromechanical Systems"  Bulletin of 48th Annual Meeting of the Division of Fluid Dynamics of the American Physical Society, Irvine, California, USA, November 1995
Lanzillotto, A-M, Amabile M., Leu, T. S., Sawicki, M., Wildes, R.  "Real-Time 3D Micro-Imaging, Visualization and Analysis of Fluid Transport in Microelectromechanical Systems"  Transducers'95 ; Eurosensors IX, Stockholm, Sweden, 1995.
Liu, C. , Tsao, T. , Tai, Y.C. , Leu, T. S., Ho, C.M. , Tang, W.L. , and Miu, D. “ Out of Plane Permally Magnetic Actuators for Delta Wing Control”  Proceeding of IEEE Micro-Electro-Mechanical-System Workshop, 1995
 (C)專書及專書論文(Theses and Books)
博士論文 "The Control of Wakes/Mixing Layers via Suction at the Trailing Edge of a Splitter Plate"  Ph. D. Thesis, University of California, Los Angeles, 1994
碩士論文"Flow Behind an Axisymmetric Bluff Body in a Circular-to-Rectangular Transition Duct"  M. Sc. Thesis, National Cheng Kung University, Tainan, Taiwan, 1989
(D)技術報告及其他等(Technical Reports and Others)
技術報告: 整合有機薄膜光電二極體用於微尺度化學發光檢驗晶片的技術發展 國科會(NSC 97-2221-E-006 -064) (主持人), 2009
技術報告: 三維噴印核心技術之研究發展第二期三年計畫第三年期末報告, 經濟部 , 2009.
技術報告: 三維噴印核心技術之研究發展第二期三年計畫第三年期中報告, 經濟部 , 2009.
技術報告: 新型熱泡式微幫浦驅動之封閉迴管路及其應用於微型熱交換器之研究發展 國科會(NSC 96-2221-E-006 -165) (主持人), 2008
技術報告: 三維噴印核心技術之研究發展第二期三年計畫第二年期末報告, 經濟部 , 2008.
技術報告: 三維噴印核心技術之研究發展第二期三年計畫第二年期中報告, 經濟部 , 2008.
技術報告: 表面改質技術於微冷凝晶片之應用發展 國科會(NSC95-2221-E-006-389) (主持人), 2007
技術報告: 應用介電泳力組裝微奈米粒子模版製作光子晶體的研究發展 國科會(NSC95-2221-E-006-390) (主持人), 2007
技術報告: 三維噴印核心技術之研究發展第二期三年計畫第一年期末報告, 經濟部 , 2007.
技術報告: 三維噴印核心技術之研究發展第二期三年計畫第一年期中報告, 經濟部 , 2007.
技術報告: 新型全介電泳力式微流分類晶片用於細胞研究發展 國科會(NSC94-2212-E-006-106) (主持人), 2006
技術報告: 新型光啟動之介電泳力高速篩選分類晶片的研究發展 國科會(NSC93-2212-E-006-059)  (主持人), 2005
技術報告: 微液滴的產生及特性研究期中報告, 2005 成大-工研院創新前瞻計畫精密機械與微機電分項學研合作計畫 (共同主持人), 2005.
技術報告: 三維噴印核心技術之研究發展三年計畫第三年期末報告, 經濟部 , 2005.
技術報告: 三維噴印核心技術之研究發展三年計畫第三年期中報告, 經濟部 , 2005.
技術報告: 微液滴相變化之研究期末報告, 工研院電子所建教合作 (主持人), 2004.
技術報告: 微液滴相變化之研究期中報告, 工研院電子所建教合作 (主持人), 2004.
技術報告: 三維噴印核心技術之研究發展三年計畫第二年期末報告, 經濟部 , 2004
技術報告: 三維噴印核心技術之研究發展三年計畫第二年期中報告, 經濟部 , 2004.
 技術報告: 整合型微推進器的製作與發展(III) 國科會 (NSC92-2212-E-006-007) (主持人), 2004
技術報告: 光碟式微流體生物感測器期末報告, 榮睿生物科技股份有限公司(主持人), 2004.
技術報告: 光碟式微流體生物感測器期中報告, 榮睿生物科技股份有限公司(主持人), 2004.
技術報告: 三維噴印核心技術之研究發展三年計畫第一年期末報告, 經濟部 , 2003.
技術報告: 三維噴印核心技術之研究發展三年計畫第一年期中報告, 經濟部 , 2003.
技術報告 微機電技術在飛行控制系統之應用(II) 國防基金 (主持人), 2003
技術報告: 整合型微推進器的製作與發展(II) 國科會 (NSC91-2212-E-006-124) (主持人), 2003
技術報告: 微機電技術製作之實驗光碟片用於微流晶片的研究發展(II),, 國科會 (NSC 91-2212-E-006-138) (主持人), 2003
技術報告 微機電技術在飛行控制系統之應用(I) 國防基金 (主持人), 2002
技術報告: 整合型微推進器的製作與發展(I) 國科會 (NSC90-2212-E-006-159) (主持人), 2002
技術報告: 微機電技術製作之實驗光碟片用於微流晶片的研究發展(I), 國科會 (NSC 90-2212-E-006-110) (主持人), 2002.
技術報告: 微機電製作之微流分類晶片用於細胞分離的研究發展, 國科會 (NSC 89-2212-E-006-148) (主持人), 2001.
(E) 專利 (patents)
中華民國專利﹐ "無動件閥門之結構" 中華民國專利證書發明第 I 403655 , 2013. (2013/8/1~2030/3/1)
中華民國專利﹐ "晶片低溫接合方式及其晶片" 中華民國專利證書發明第 I 348965 , 2011. (2011/9/21~2029/2/4)
中華民國專利﹐ "整合型微混合霧化系統," 中華民國專利證書發明第 I 270412 , 2007.  專利權期間2007.1.11~2025.4.26 (2007/1/11~2025/4/26)
USA Patent: Method for Rapid Prototyping by using Linear light as Sources, U. S. A. Patent number 7,158,849 B2, Jan. 2, 2007
USA Patent: Method for Rapid Prototyping by using plane light as sources, U. S. A. Patent number 7,079,915 B2, Jul. 18, 2006
中華民國專利, "一種原型工件之製造方法," 中華民國專利證書發明 發明第 I 26687 , 2006,專利權期間2006.11.21~2025.5.19 (TDPA91-EC-17-A-05-S1-0014)
中華民國專利, "微型馬達無動件閥結構," 中華民國專利證書發明 發明第 I 266015 , 2006
中華民國專利﹐ "一種快速原型工件之製造方法," 中華民國專利證書發明第 225825 , 2005.
中華民國專利﹐ "整合型微噴嘴系統," 中華民國專利證書發明第 245670 , 2005.
中華民國專利, "整合表面張力微閥之液珠噴射控制系統," 中華民國專利證書發明第201975 , 2004
USA Patent: Ink droplet characteristic measuring apparatus for providing quantitative information about ink droplets ejected by inkjet printer head, U.S Patent number WO200008419-A
USA Patent: Electromagnetically Actuated Micromachined Flap, U.S Patent number 5,629.918. 
 
    Publications