|
A. Refereed Papers
1. Chiang, D. Y. and Beck, J. L. (1994), "A new class of distributed-element
models for cyclic plasticity, part 1: theory and application," Int. J. Solids
and Structures, 31(4), pp.469-484. (EI, SCI)
2. Chiang, D. Y. and Beck, J. L. (1994), "A new class of distributed-element
models for cyclic plasticity part 2: on important properties of material
behavior, " Int. J. Solids and Structures, 31(4), pp. 485-496. (EI, SCI)
3. Chiang, D. Y. and Beck, J. L. (1996), "A transformation method for
implementing classical multi-yield-surface theory using the hardening rule of
Mroz," Int. J. Solids and Structures, 33(28), pp. 4239-4261. (EI, SCI)
4. Chiang, D. Y. (1997), "A phenomenological model for cyclic plasticity,"
ASME J. Engineering Materials and Technology, 119(1), pp. 7-11. (EI, SCI)
5. Chiang, D. Y. and Huang, S. T. (1997), "Modal parameter identification using
simulated evolution," AIAA Journal, 35(7), pp. 1204-1208. (EI, SCI)
6. Chiang, D. Y. (1997), "Modeling and identification of elastic-plastic systems
using the distributed-element model," ASME J. Engineering Materials and
Technology, 119(4), pp. 332-336. (EI, SCI)
7. Chiang, D. Y. (1998) "Modeling and identification of inelastic systems using
the endochronic model," ASME J. Applied Mech., June, 65, pp. 513-518. (EI,
SCI)
8. Chiang, D. Y. and Lai, W. Y. (1998) "A Two-step Structural Damage Detection
Method," Transactions of the Aeronautical and Astronautical Society of
the Republic of China, Vol. 30, No. 1, pp. 19-26. (in Chinese) (EI )
9. Chiang, D. Y. (1998) "The Concept of Plastic Equilibrium Points and Its Applications in Cyclic Plasticity," Int. J. Plasticity, Vol. 14,
No. 9, pp. 933-943. (EI, SCI)
10. Chiang, D. Y. and Cheng, M. S. (1998) "An Application of Time-Domain Modal Parameter Identification method," Transactions of the Aeronautical and Astronautical Society of the Republic of China, Vol. 30, No. 3, pp. 211-216. (in Chinese) (EI )
11. Chiang, D. Y. and Jeng, M. S. (1999) "Modal Parameter Identification from
Ambient Response," AIAA Journal, Vol. 37, No. 4, pp. 513-515. (EI, SCI)
12. Chiang, D. Y. (1999) "The Generalized Masing Model for Deteriorating Hysteresis and Cyclic Plasticity," Applied Mathematical Modeling, Vol. 23, pp. 847-863. (EI, SCI)
13. Chiang, D. Y. and Lai, W. Y. (1999) "Structural Damage Detection Using the Simulated Evolution Method," AIAA Journal, Vol. 37, No. 10, pp. 1331-1333. (EI, SCI)
14. Moh, J.-S. and Chiang, D. Y. (2000) "An Improved Simulated Annealing Search for Structural Optimization," AIAA Journal, Vol. 38, No. 10, pp. 1965-1973. (EI, SCI)
15. Moh, J.-S. and Chiang, D. Y. (2001) "A Robust Global Optimization Method Based on Simulated Annealing," Engineering Optimization, Vol. 33, pp. 373-398. (EI, SCI)
16. Chiang, D. Y., Su, K.-H. and Liao, C.-H. (2002), "A Study on Subsequent Yield Surface Based on the Distributed-Element Model," Int. J. Plasticity, Vol. 18, pp. 51-70. (EI, SCI)
17. Chiang, D. Y. and Moh, J.-S. (2003) "Structural Damage Detection Using A Global Optimization Method," Transactions of the Aeronautical and Astronautical Society of the Republic of China, Vol.35, No. 1, in press. (EI)
B. Conference Papers
a. International Conference
Tan, R. Y. and Chiang, D. Y. (1987), "Stochastic response of structures with bilinear hysteresis," Pro. 5th Int. Conf. on Applications of Statistics and Probability in Soil and Structural Engineering, pp. 135-140, Canada.
Beck, J. L. and Chiang, D. Y. (1990), "Modal Identification of A Large Flexible Structure," Proceedings of the 2nd USAF/NASA Workshop on System Identification and Health Monitoring of Precision Space Structures, Pasadena.
Chiang, D. Y. (1994), "Identification of Inelastic Systems Using the Distributed-Element Model," Proceedings of the 1st World Conference on Structural Control, Vol. 1, WP3, pp.103-112, Pasadena, U.S.A.
Chiang, D. Y. (1996), "The Generalized Masing Models for Deteriorating Hysteresis and Cyclic Plasticity," 19th Int. Congress of Theoretical and Applied Mechanics, Kyoto, Japan.
Chiang, D. Y. and Huang, S. T. (1997), "Modal Parameter Identification Using Simulated Evolution," Proceedings of the IASTED International Conference on Applied Modelling and Simulation, Banff, Canada, pp. 26-29.
Chiang, D. Y. (1998), "Modeling and Identification of Inelastic Systems Using the Endochronic Model," Int. Symposium on Inelastic Deformation, Damage and Life Analysis !|98, Atlanta, Georgia, USA, Vol. 2, pp. 1060-1065.
Chiang, D. Y. and Kwo, Y. S. (2000), "A Simple Physical Model for Cyclic Relaxation and Ratcheting," Proc. 8th Int. Symposium on Plasticity and Its Current Applications, Whistler BC, Canada, July, pp.330-332.
Moh, J. S. and Chiang, D. Y. (2001), "An Improved Simulated Annealing Search for Structural Damage Detection," The 4th Pacific Int. Conf. on Aerospace Science and Technology, pp. 109-116, Kaoshiung, Taiwan, May.
Miau, J. J., Chung, K. M., Chiang, D. Y. (2002), "Promoting e-Learning Course in Aerospace Engineering Education in Taiwan," , 2002 IEEE/ASME International Conference on Advanced Manufacturing Technologies and Education in the 21st Century, A112, August 11-14, National Chung Cheng University, Chia-Yi, Taiwan.
Miau, J. J., Chung, K. M., Chiang, D. Y. (2002) , " A Review of Aerospace Engineering Program Office for Education Reformation in Taiwan," 2002 IEEE/ASME International Conference on Advanced Manufacturing Technologies and Education in the 21st Century, A114, August 11-14, National Chung Cheng University, Chia-Yi, Taiwan.
Chiang, D. Y., Miau, J. J., Chung, K. M., and Wu, J., (2003), "An Innovative Distance-Learning Course on the Introduction of Aviation Technology," Submitted to the International Conference on Engineering Education, Valencia, Spain, July 22-26, 2003.
Chiang, D. Y., (2003)A "Modeling of biaxial ratcheting Using the Distributed-Element Model," Submitted to the 10th International Symposium on Plasticity and Its Current Applications, July 7-11, 2003.
b. National Conference
Tan, R. Y. and Chiang, D. Y. (1986) " An Application of the Stochastc Finite-Element Method," Proceedings of the 10th National Conference on Theoretical and Applied Mechanics, pp. 543-550, Kaohsiung, Taiwan.
Chiang, D. Y. and Chao, L. S. (1995) "Modal Parameter Identification Using a Fast Recursive Formula," Proceedings of the 37th National Conference of the Aeronautic and Astronautic Society of Republic of China, Taipei, Taiwan, pp. 871-880.
Chiang, D. Y. and Rai, W. Y. (1996) "A Two-Stage Structural Damage Detection Method," Proceedings of the 38th National Conference of the Aeronautic and Astronautic Society of Republic of China, Taipei, Taiwan, pp. 287-295.
Chiang, D. Y. and Jeng, M. S. (1997) "Modal Parameter Identification from Ambient Vibration Data," Proceedings of the 39th National Conference of the Aeronautic and Astronautic Society of Republic of China, Tainan, Taiwan, pp. 445-452.
Chiang, D. Y. (1997) "The Concept of Plastic Equilibrium Points and Its Applications in Cyclic Plasticity," Proceedings of the 21st
National Conference on Theoretical and Applied Mechanics, Tai-Chung, Taiwan, Vol. 2, pp. 185-190.
Chiang, D. Y. and Hwu, L. S. (1998) "Structural Damage Detection with Model Reduction," Proceedings of the 40th National Conference of the Aeronautic and Astronautic Society of Republic of China, Ta-Chung, Taiwan, pp. 429-436.
Chiang, D. Y. and Kwo, Y. S. (1998) "A Study on Cyclic Relaxation and Ratcheting," Proceedings of the 22nd
National Conference on Theoretical and Applied Mechanics, Tainan, Taiwan, Vol. 2, pp. 251-258.
Chiang, D. Y. and Mou, C. S. (1998) "A Global Optimization Method Based on Simulated Annealing,"
Proceedings of the 15th National Conference on Mechanical Engineering, Tainan, Taiwan.
Chiang, D. Y. and Liao, C. H. (1999) "A Study of Subsequent Yield Surfaces Based on the Distributed-Element Model," Proceedings of 23rd National Conference on Theoretical and Applied Mechanics, Hsing-Chu, Taiwan, Vol. 2, pp. 117-124.
Chiang, D. Y. and Liu, H. Z. (1999) "Optimal Firing Sequence of Multiple-Launch Rocket Systems Using Annealing Neural Network," Proceedings of the CIROC/CSCA/AASRC Joint Conference!ATauo-Yuan, Taiwan, pp. 281-287.
Chiang, D. Y. and Jang, C. F. (2000) "Modal Parameter Identification from Ambient Vibration Data,"
Proceedings of 23rd National Conference on Theoretical and Applied Mechanics, Chung-Li, Taiwan.
Moh, J. S. and Chiang, D. Y. (2001) "An Improved Simulated Annealing Search for Structural Optimization,"
Proceedings of the CIROC/CSCA/AASRC Joint Conference!App. AA525-532!AChung-Li, Taiwan.
Chiang, D. Y. and Moh, J. S., (2002) "Structural Damage Detection Using A Global Optimization Method,"
Proceedings of the CIROC/CSCA/AASRC Joint Conference, Kaohsiung, Taiwan.
|
Educations